Sign Up For SPP Emails!
Click Here


	Customer Service \| Track An Order \| View Cart \| Home

Safety Cover Installation Instructions

6. Safety Cover Removal

With the notched rod held vertically, place it over the top of a brass insert screw ensuring that the protruding tab at the end of the rod is on the side of the screw nearest the pool.
Turn the rod 180° or a half turn, keeping the tab on the rod between the spring and the screw.
Leaning the top of the rod toward the pool will disengage the spring and it will slide up the rod a small distance. Proceed around the pool until one end of each strap is disconnected. The opposite end of each strap can now be removed by hand.
Remove the cover, clean, dry and pack. Store where it will not be exposed to the sun and in a location where it's not accessible to rodents.
Use Allen Key to turn brass screws down into the anchors.
To prevent dust, dirt, etc. from damaging the plug threads, it is advisable to coat the screw with a household lubricant.